Vinyl Decal Application Steps

 

You will need the fallowing:

·         Old credit card or clean plastic plaster scrapper

·         Lint free rag

·         Isopropyl alcohol

·         Masking tape

·         Windex or other glass or surface cleaner

·         Scissors

 

1. Clean application surface thoroughly with Windex or other surface cleaner and paper towel first.

2. Next take your lint free rag and apply isopropyl alcohol to the rag.

3. Take rag and clean the surface that you have already cleaned with the Windex.  

4. Pre-place graphic where you would like it to go.

5. Underneath graphic place a piece of masking tape as a guideline. Be sure not to stick tape to graphic.

6. Carefully hold graphic in place and take a piece of masking tape in the center going vertically. Making sure not to overlap and cut vinyl.

7. Carefully lift up graphic and backing all together. Peal off backing at 45-degree angle till the backing is completely clear of the transfer tape.

8.  Lay what is stuck to the transfer tape to your cleaned surface.

9. Take you old credit card or clean plastic putty scrapper and at a 45 degree angle using pressure go across the transfer tape on top of the graphic which is now on your surface.

10. Peel off the Transfer tape at a 45 degree angle and make sure that the transfer tape is kept on top of the transfer tape not peeled off yet.

11. If vinyl is still stuck to the transfer tape place the transfer tape back in original passion and do step 10 over again.

12. If every thing goes smoothly your tape should come off and leave your graphic decal on your surface.

13. If you have any bubbles take a pin and pop then carefully and then smooth out with you finger.

14. If you have any tunnels take a razor knife and make a slit from one side of the tunnel to the other. Then take your finger and smooth it out.

15. Take your old credit card or clean plastic plaster scrapper and your lint free rag and put the lint free rag around you credit card or plaster scrapper.

16. Lightly go over your applied graphic to make sure that it is stuck to your surface.

17. When you are done stand back and admire your work. Hope it works out great for you.      

 

 

 

 

 

Thanks so much for ordering hope we can help again soon!

MTG Graphics

mtggraphics@alltel.net

 

 


[Return To Main Menu]